Industry knowledge

Quality control of quality printing Steps to control the work process To confirm the work process, you must record the data clearly!

Rotary ink balance The all-commercial rotary machine is a high-speed high-quality printing machine imported from abroad in recent years. It has the a

Ink permeation drying test method 1, the principle At regular intervals, the ink is rubbed on the newsprint and the blank newsprint is rubbed under

Suggestions for Freehand production and output 1, on the text: Generally, when doing the draft, it is best to turn all the text into a curve. In this

PS version common faults and treatment methods Upper dirt 1) Insufficient development 2) Inappropriate gluing 3) The water roll is too dirty

The effect of ink on color reproduction What is smog? Hydrating is almost just a failure of coated paper and paperboard. It usually occurs on four-co

Ink coloring force test method 1, the principle The sample and the standard were diluted by the quantitative standard white ink, and the concentrati

Imaging Mechanism of Thermal CTP Plate The data show that the CTP plate in 2003 accounted for about 30% of the total global plate, and is expected to

Multi-color machine and monochrome machine "flowing" printing method In recent years, with the popularity of four-color machines and multi-color ma

PDF for pre-printing pre-printing With the rapid development of computer technology and network communication technology, the printing and publishing

About DEK paste offset printing technology The rapid development of electronic technology to promote the continuous development of SMT surface mount

Photo output tips two Tip 1: How to make a four-color mesh on a piece of film? Many people will say that this is impossible. But with the "partial r