Industry knowledge

Analysis of the phenomenon of inverted hair in offset printing First, what is the downturn When printing solid lines, lines or text, burrs are produ

KBA Rapida 104 printing experience When the KBA Rapida 104 four-color machine printed a coated paper with a basis weight of 105 g/m2, the paper tail

Process measures to prevent the spine from cutting and wrinkling The book printing products adopting the wireless adhesive binding process, due to th

Combined pressure fault ABC The combined pressure fault is one of the most common faults in the printing process. No matter the size, simplicity or c

From the repair of offset press roller to offset printing technology and management In the domestic printing industry, in the printing process, there

Causes and troubleshooting of common square PSPNT faults Fault 1: Start PSPNT 2.1, 5055A laser imagesetter does not respond Before starting the micr

Thermal CTP VS violet laser CTP misunderstanding At present, CTP technology mainly has two major categories of heat and light, and the debate about t

Inkjet technology revealed-two Excimer laser cutting print head technology The excimer laser cutting print head technology combines the ink jet ho

Inkjet technology revealed (one) Currently, major manufacturers are targeting the inkjet printer market. They have stepped up their offensives thro

Crack generation and elimination Cracks are stained interference patterns caused by overlapping data grids. Cracks are usually produced in three stag

Thermal transfer ribbon THERMAL TRANSFER RIBBON, in a nutshell, is the process of transferring ink from a ribbon media to a paper or film using heat

Introduction to the principle and method of ink penetration drying test At regular intervals, the ink is rubbed on the newsprint and the blank newspr