RFID tag antenna manufacturing technology
We are a big printing company in Shenzhen China . We offer all book publications, hardcover book printing, papercover book printing, hardcover notebook, sprial book printing, saddle stiching book printing, booklet printing,packaging box, calendars, all kinds of PVC, product brochures, notes, Children's book, stickers, all kinds of special paper color printing products, game cardand so on.
For more information please visit
http://www.joyful-printing.com. ENG only
http://www.joyful-printing.net
http://www.joyful-printing.org
email: info@joyful-printing.net
Currently, there are three antenna manufacturing techniques: etched/punched antennas, printed antennas, and wound antennas. Among them, winding and printing technology has been widely used in mainland China. Most of the RFID tag manufacturers in Taiwan also use this technology; while etching technology is mainly used in Europe, and in Taiwan, there are only a few flexible circuit boards. The factory has the ability to use this technology to manufacture RFID tags. Winding technology can only be used to manufacture 125K and 13.56M bandwidth RFID tags, which cannot be used to manufacture UHF bandwidth RFID tags. Both printing and etching techniques can be applied to mass production of 13.56M, UHF bandwidth, but the quality of the printing is worse than the etching and the durability is shorter. Generally printed RFID tags have a durability of two to three years. However, etched RFID tags have a durability of more than ten years.
According to the requirements of the US passport (e-passport), the tag has a durability requirement of more than ten years and must be manufactured by etching technology. The following is a brief introduction to the characteristics and differences between the two technologies of winding and printing.
1. Printed antenna structure and features
A significant difference between RFID tags (also known as non-contact IC cards) and other card products such as contact IC cards is the inclusion of an INLAY layer containing antennas and wafers. Different INLAY manufacturing methods form various manufacturing techniques. Different manufacturing techniques also affect the structural design of RFID tags. An INLAY has a printed layer and a protective film on both sides to form an RFID tag.
Compared to wound antennas, printed antennas have the following advantages:
(1) Printed antenna manufacturing can accurately adjust electrical performance parameters to optimize card performance. The design of the electrical performance parameters of the RFID tag is very important, which directly affects the adaptability and working stability of the RFID tag reading distance to the card reader. The main technical parameters of the main technical properties of RFID tags are: resonant frequency, Q value and impedance. In order to achieve optimal performance, all RFID tag manufacturing techniques can be obtained by changing the antenna number, antenna size and wire diameter. However, in addition to the printed antenna technology, it is also possible to accurately adjust the desired value to the desired target value by locally changing the width of the line, changing the thickness of the wafer layer, and the like. The resonant frequency, Q value and impedance of the RFID tag can be measured using an impedance meter or a network analyzer.
(2) Printed antenna manufacturing can change the shape of the coil arbitrarily to meet the user's surface processing requirements. Due to the versatile use of RFID cards and the increasing variety of personalization requirements, there are various restrictions on the surface of the RFID tag and the card body, such as embossing, sensitive graphics and the like. The printed antenna INLAY can be easily changed to any shape as required, even irregular curves to meet customer requirements without reducing any performance.
(3) Printed antenna manufacturing can use a variety of different card base materials. This structure can use different card body materials according to user requirements. In addition to PVC, PET-G, PET, ABS, PC and paper-based materials can also be used. . If winding technology is used, it is difficult to produce RFID tags that are adapted to harsh environmental conditions using materials such as PCs.
(4) Printed antenna manufacturing is suitable for wafer modules provided by various manufacturers. With the widespread use of RFID tags, more and more IC chip manufacturers have joined the team that produces RFID chip modules. Due to the lack of uniform standards, the electrical performance parameters are different, and the flexibility of the printed antenna INLAY structure can be matched with various wafers and modules in different package formats to achieve the best performance.
2. antenna printing technology
Antenna printing is an important processing step.
Antenna printing technology is the same as general screen printing technology. First, make a plate according to the designed antenna shape. The printing mesh can be selected between 100-257 mesh/吋 according to actual needs. The choice of printing ink is critical. Since the ink is an electrical conductor. The main components of the ink are metals such as silver and aluminum. Use inks with low resistivity and high charge-to-value ratio. The resistance of the coil after printing is generally between 2 and 25 Ω.
According to the actual technical needs, the single-sided or double-sided printed antenna can be used to obtain the required inductive reactance. In order to obtain a high-quality antenna, it is also necessary to improve in many subtle ways, such as ink selection, ink reconciliation, pressure size, mesh selection, printing board production and ink drying. These all require long-term practical experience accumulation. The most notable feature of printed antenna technology compared to wound and etched antennas is the low investment and high efficiency.
3. the connection technology between the chip module and the antenna
Connection is the connection between the chip module and the antenna, which is a key part of all different antenna manufacturing techniques. The printed antenna and the module are generally bonded by a conductive adhesive or directly pressed. The overlapping area of the printed antenna is generally larger than the area of the connection end of the module, which ensures the reliability of the connection, and the high temperature and high pressure during lamination, so that the lead end of the module and the antenna tower block are integrated. The advantages of this type of connection are high technical operability and high performance reliability.
Wirewound antennas are typically soldered to the module. This technology ensures a good connection in the case of ensuring a reliable soldering, an antenna hard and a very accurate module position and a good welding current control. However, due to many controlled factors, defects such as false welding, false welding and partial welding are prone to occur. Another advantage of this type of connection is that it can be easily connected using small-sized modules such as Mifare1, FCP2 modules, etc. without reducing throughput and increasing cost. With this small package module, RFID tags with a thickness of ≦0.5mm can be fabricated with no trace on the surface. The RFID tag manufacturing industry now has the technology to bond wafers to printed antennas and is widely used in the production of smart tags.

