Always lifting the label? The truth behind it will surprise you!
Self-adhesive label materials usually consist of three parts: backing paper, face paper, and adhesive. Among them, the backing paper has an oily surface that acts as a barrier to the adhesive, ensuring the surface paper can easily detach from the backing paper; Face paper is the main carrier of label printing content and can be classified by material into coated paper, thermal paper, PET, PVC, etc.
Due to both subjective and objective factors, self-adhesive labels often experience issues such as warping, wrinkling, bubbles, and breakage of the backing paper during labeling, which customers complain about and cause headaches for label printing companies. Among these, warping is the most common issue during labeling. In this article, drawing on practical experience, the author systematically analyzes the causes of labeling lifting problems and offers solutions, hoping to provide some assistance to readers.
The main factors affecting label lifting
01
The impact of adhesive stickiness and product compatibility on labeling lifting
If the adhesive of the label material is not very sticky, it will inevitably cause labeling to lift. Additionally, since there are many types of adhesive label materials, there are issues during labeling as to whether different objects to be applied and the materials are compatible with each other. For example, AW4200A, AW3209, and other adhesive labels cannot be applied to bottles with diameters less than 3cm, and hot melt adhesive labels cannot be applied to PVC objects.
All these precautions are clearly stated in the technical parameters of the self-adhesive label materials. Therefore, it is recommended that label printing companies carefully read the product's technical parameters when selecting self-adhesive label materials, and also include the technical specifications of the self-adhesive label materials when submitting samples to end users for confirmation, to avoid unnecessary risks caused by misuse by end users.
02
The flatness of the self-adhesive label surface material affects label lifting
For adhesive label materials, the smoothness of the label surface material is a key factor affecting the overall material smoothness, and overall material smoothness is an important indicator for ensuring printing quality. Therefore, during the labeling process, it is essential to check whether the label surface material is flat, especially when labels have lamination. Be sure the lamination tension must not be too high; otherwise, excessive tension will cause the label to curl upward, causing label lifting.
03
The impact of label design on label lifting
When designing labels, try to avoid overlapping at the end as much as possible. If it cannot be avoided, cold lamination should be avoided, and overlapping areas should not be printed or glossed.
When labeling with overlapping at the end of the label, pay special attention to the following points: (1) If the label must be laminated, it must undergo corona treatment after lamination so that the film surface can exceed 38 dynes, enabling normal labeling; (2) During printing, leave blank space at the overlap area, and make 1~2 lines larger toward the overlap area to ensure no white exposure after labeling; (3) For labels requiring gloss, change the original full-sheet coating to partial coating, leaving the overlapping areas unpolished; (4) Pay attention to the degree of UV ink curing, as over-cured ink layer surface energy will decrease, affecting the adhesion of the next ink layer and the adhesive's adhesion.
04
The impact of the material on label lifting
Because the material being labeled differs, the surface energy will vary, so the effect of the same self-adhesive label will also vary. Generally, the surface of objects being labeled with different materials can be compared to: stainless steel> glass> PET>PP>PE.
Additionally, the same material can have different surface energies due to different processing techniques, such as glass bottles treated with silicification or plastic bottles with varying surface roughness. Therefore, for objects or bottles with different surface energies, it is necessary to select adhesive labels for matching.
05
The shape of the item being labeled affects label lifting
To achieve the ideal labeling effect, the surface of the item to be labeled should be flat after unfolding. If the labeling surface of the object is curved in both directions (spherical labeling surface) after unfolding, it will be difficult to achieve the ideal labeling effect. Therefore, when designing the bottle body, it is best to avoid such shapes or avoid such positions during labeling.
Additionally, due to production cost pressures, blow molding factories often reduce the bottle weight, making the bottle body thinner, which causes significant deformation before and after filling, making it impossible to apply high labeling pressure. For example, when hot filling liquids at 30°C~40°C after labeling, the bottle body bulges and deforms, and after cooling, the bottle body shrinks, resulting in labeling and lifting defects.
06
The impact of the surface condition of the object being applied to label lifting
The roughness of the surface of the object to be applied greatly affects the labeling effect; the rougher the surface, the more likely it is to cause labeling lifting. Additionally, if the surface of the object is covered with oil stains, water droplets, dust, or other impurities, it is as if the adhesive sticks to these impurities rather than the surface of the object being applied, which also easily causes labeling lifting.
Additionally, whether the surface of the product is treated with special techniques may also affect the final labeling effect. For example, when filling small-diameter glass bottles, since the liquid is not allowed to stick to the wall, the bottle surface is preemptively cleaned with silicone-added water. If a large amount of silicone remains after cleaning, the label will cause labeling to lift after labeling.
07
The impact of labeling environment on labeling lifting
Generally, labeling temperature requirements include four aspects: label temperature, temperature of the object being applied, ambient temperature of labeling, and storage temperature within 24 hours after labeling. The specific details are as follows:
(1) The technical parameters of each self-adhesive label material clearly indicate the minimum labeling temperature and usage temperature range. For example, the NW5539 label product has a minimum labeling temperature of 10°C and a usage temperature range of -15°C~65°C.
(2) During labeling, the ambient temperature must meet the minimum labeling temperature of the label. Only then can the adhesive flow normally and maintain normal adhesion.
(3) The surface temperature of the object to be applied must be above the minimum labeling temperature to prevent the originally flowable adhesive from losing or stopping flowing due to being applied to a low-temperature surface, which would lead to decreased viscosity.
(4) The storage environment temperature after labeling is also very important. To maintain the adhesive's fluidity and convert the adhesive from initial adhesive to final adhesive, it must be done in an environment above the minimum labeling temperature.
Different labeling processes also affect the issue of label lifting. For example, an ice cream brand injects ice cream into plastic boxes at 10°C, automatically fills the lid, then automatically labels the lid and around the box, and finally freezes it at -15°C for shaping. After 1~2 hours, it is transferred to a large cold storage facility, where most labels curl after freezing and most of the labels fall off after transferring to large cold storage.
To solve this problem, the company pre-labeled the plastic boxes that needed to be filled with ice cream the next day, then after 24 hours, they refilled, lidd, and quick-froze the containers before transferring them to large cold storage for storage, effectively solving the problem of label lifting.
Depending on the surface and requirements of the object being attached, different labeling mechanisms should be selected. Common types include sponge wheels, pulleys, and tendering plates. Additionally, the labeling machine should apply appropriate labeling pressure to ensure a perfect fit between the label and the object being applied.
When the labeling pressure is insufficient, such as using a soft brush, an overly soft labeling plate, or the spacing between the sponge wheel, pulley, and the bottle body too large, the label may lift due to insufficient pressure. Additionally, if the labeling mechanism shows signs of aging, it will affect the labeling pressure, which may lead to labeling lifting.
Case studies of customers with labeling and lifting of the label
In 2021, a company's PE self-adhesive label exhibited peeling during the labeling process and urgently needed to be addressed. From the company's on-site report: after removing the item from the cold storage, the label was applied while condensation was still present on the surface, and immediately placed the product in a very cold storage room at a very low temperature, preventing the label storage temperature from reaching above 10°C. Therefore, we concluded that the labeling lifting phenomenon was caused by environmental issues.
The normal procedure is: labels must be stored 24 hours before labeling in an environment above 10°C, because the adhesive on this label only flows well at temperatures above 10°C, allowing the adhesive's stickiness to function properly.
Following the recommendations, the company immediately made improvements and adjusted the storage area to ensure the temperature of the labels stayed above 10°C. After follow-up, no labels were found to have peeling issues during application.
Labeling lifting on self-adhesive labels is very common in actual production and applications. Whether label printing companies or end users, they should select the most suitable self-adhesive label materials based on the actual application of the label, and pay attention to the impact of environmental temperature and humidity on the label. Only by considering multiple aspects can the labeling quality of products be improved and products become more aesthetically pleasing.
Always lifting the label? The truth behind it will surprise you!
Nov 16, 2026
Leave a message
Previous
No InformationSend Inquiry

