Printing white solve? I understand this in a moment!

Printing white solve? I understand this in a moment!

We are a big printing company in Shenzhen China . We offer all book publications, hardcover book printing, papercover book printing, hardcover notebook, sprial book printing, saddle stiching book printing, booklet printing,packaging box, calendars, all kinds of PVC, product brochures, notes, Children's book, stickers, all kinds of special paper color printing products, game cardand so on.

For more information please visit 

http://www.joyful-printing.com.   ENG only    

http://www.joyful-printing.net 

http://www.joyful-printing.org

email: info@joyful-printing.net

Printing whiteness often occurs in production, which is time consuming and labor intensive. When there is whiteness, many factories focus on how to solve the whitening, but forget that they only need to make some minor adjustments before the operation, which can completely avoid the printing whiteness often occurs in production, time-consuming and labor-intensive. It also affects production efficiency. When there is whiteness, many factories focus on how to solve the whitening, but forget that they only need to make some minor adjustments before the operation, which can completely avoid...

When the print white appears...

During the printing process, the printing was suddenly revealed, so the operator began to increase the printing pressure! If the printing pressure gap is 4 mm, reduce the gap to 3 mm, or white; continue to add printing pressure, adjust to 2 mm, this time the cardboard has been pressed It’s flat, and the printed fonts are also smeared, but the printing is still white...

As a result, the printing press rushed to find management personnel and collectively studied the causes of the whiteness. Ink problem? Cardboard problem? Equipment problem? Time passed by, so it took a lot of time and effort, and the problem was still not solved. In fact, it is not difficult to solve the problem. It is because we have the wrong method in operation. It always happens when the problem occurs.

So how to avoid printing whitening and solve printing problems?

First, pre-press preparation is inevitable

1. Check the ink viscosity before the ink is on the machine. Is it normal?

A common problem in printing whitening is that the viscosity of the ink is too low, which is more likely to occur after many uses. Because in the production process, the printer often adds water to the ink tank, causing the ink viscosity to drop. This causes the printing to appear white, so the ink must be tested before going to the machine.

2. Check if the printing plate is good.

If the printing plate is used for a long time or the printing plate ink is too much dirt, the amount of ink transfer in the printing plate will be reduced. When the ink transfer amount is reduced, the printing whiteness will often occur.

3, anilox roller

The cleaning of the anilox roller directly affects the printing condition. A large part is that the anilox roller is not cleaned, so that the amount of ink carried by the anilox roller is small, resulting in printing whitening.

Second, learn to print the whiteout method

1. First check the thickness of the unprinted cardboard, and then check the thickness of the cardboard after the cardboard exits from the paper feeding unit to see if the cardboard has been crushed by the paper feed roller. If the problem of crushing the cardboard is solved first, the paper feed gap is -0.3 mm.

2. Check if the printing plate pressure is normal. You can check if there is enough ink in the printing plate. The printing plate hardness version is suitable for 34-36 degrees.

3. The above is correct and the printing pressure value is increased. The pressure value should not be too large. If it is too large, it will easily produce printing paste, and the printing will be slower and faster.

Of course, if the viscosity of the printing ink is correct, the printing plate and the anilox roller are still good in printing whitening. The main adjustment direction is dominated by the ink process, the printing pressure should not be increased all the time, and the viscosity of the ink and the permeability of the ink can be continuously improved. It is also possible to adjust the printing press to the sheet feeding state for printing.