Prepress computer output 50 places to pay attention to
We are a big printing company in Shenzhen China . We offer all book publications, hardcover book printing, papercover book printing, hardcover notebook, sprial book printing, saddle stiching book printing, booklet printing,packaging box, calendars, all kinds of PVC, product brochures, notes, Children's book, stickers, all kinds of special paper color printing products, game cardand so on.
For more information please visit
http://www.joyful-printing.com. ENG only
http://www.joyful-printing.net
http://www.joyful-printing.org
email: info@joyful-printing.net4
1.The image scanning level is insufficient.
2. The image scanning ratio is incorrectly calculated.
3. The image level placed is insufficient and the cutting is not accurate.
4. Place the image of the error.
5. Use a low solution to make the output.
6. The RGB image is output without being transferred to CMYK.
7. the image decontamination is not complete.
8, the retreat is not appropriate, starting from the white side, to redo the land.
9. no word output.
10. Use the wrong word output.
11. Output with the damaged word.
12. Output the damaged manuscript.
13. Scan with the wrong map.
14. Make the output with the damaged software.
15. Black characters do not do Overprint.
16. black field did not add a blue version.
17. color version output error, four colors out of the spot color, the spot color out of four colors.
18. to the negative film but the sun, or vice versa.
19. the direction of the output film is wrong, the film wants to go up, up and down.
20. similar pictures, scanning is not uniform, you need to redo the scanning and output process.
21. image color correction plus or minus errors, to redo the color.
22. The highlights are wrong when scanning.
23. The RGB color block in the manuscript is not converted to CMYK.
24. the number of output is wrong, but there are three sets of one set, but only three sets of three sets.
25. Repeat the output of the non-forest that has been output.
26. The scaling is wrong when outputting.
27. non-forest size is insufficient, A3 draft used A4 non-forest.
28. The flatness straightness setting is wrong, or the wrong Printerdrive is selected.
29, the output error file, but the A draft has a B draft.
30. The number of error pages, but the fifth page is the sixth page.
31. There are more pages, but on page 5, there is a fifth page.
32. Use the wrong net angle to output.
33. Use the wrong net to output.
34. The resolution setting is incorrect during scanning.
35. The output density is too high or too low, causing the dots to be too fat or too thin.
36. Four-color film can't register the needle position.
37. did not make up the trap.
38. Too much whitening is done, and the color blocks are exposed.
39. The corner needle position is only black.
40. The color blocks that are added cannot be registered with the original color version.
41. The scan of the make-up is not color-matched with the original image, and the color correction and output should be redone.
42. The punching machine is gone.
43. The punching machine scrapes the flowers.
44. The syrup of the slab is too thick or too thin to affect the non-forest outlets.
45, the temperature of the filming machine is too high or too low, affecting non-forest outlets.
46. Use the non-forest output that has gone out.
47. The system crashes and damages the manuscript that has been prepared.
48. The system has a virus and damages the manuscript that has been prepared.
49. Store the image with a damaged MO, optical drive.
50. Lost the guest's lamp, manuscript, etc.