Industry knowledge

Poster imposition

Jun 05, 2018 Leave a message

Poster imposition


We are a big printing company in Shenzhen China . We offer all book publications, color advertising pictures, hardcover album, packaging box, calendars, all kinds of PVC, product brochures, notes, Children's book, stickers, all kinds of special paper color printing products, game cardand so on.

For more information please visit 

http://www.joyful-printing.com.   ENG only    

http://www.joyful-printing.net 

http://www.joyful-printing.org

email: 860681365@qq.com

4 open poster size

a. Formula formula for opening the paper for seniors:

Large size paper size: 1194mm x 889mm; After the burrs size: 1190mm x 885mm

Senior open is: 595mm x 442mm

Maximum printable area: 591mm (each side minus 2mm burrs when cutting the finished product) x 430mm (except for each side to subtract the 2mm burrs when cutting the finished product minus 8mm bite bit, this bite The position of the mouth is different on some printing machines, but the four boot is usually 8mm.)

b, algorithm formula of positive four-sheet paper

Regular paper size: 1092mm x 787mm; size after cutting off: 1088mm x 783mm

Four is open: 544mm x 391mm

Maximum printable area: 540mm x 377mm (explained above)

Note: Flat copper plate paper edges are generally cut 2mm on each side

Make an imposition of a senior poster

Because posters are generally based on pictures, I'll use a picture here as an example.

Import the picture into (Ctrl+H) CorelDRAW. After importing the desired picture to CorelDRAW, press Enter to place the picture in the middle (as shown).

The

Here we have posters in the middle of the picture, with 20mm white edges around each side, so we can bite the mouth (by biting the mouth means putting the bite bit on the white side, no bite bit) The size of the poster can be made into 438mm x 590mm.

Set the page to 438mm x 590mm in CorelDRAW (pictured).

Double-click on the rectangle tool to draw a box that is the same size as the page, filled in white, and remove the outline. This is the poster's page (pictured).

Select rectangle box and picture, group (Ctrl+G) click.

The next step is to draw a corner line.

Set the page to 448mm x 600mm and use hand-painted tools to make a 5mm x 5mm corner line (pictured)

Press Ctrl+A, as shown in the figure, put the corner line in the upper left corner of the page (pictured),

Press the "+" key on the keypad to copy the corner line and use the same method to place the corner line in the upper right corner of the page.

Also use the same method to put the corner under the page.

Actually the corners are still a bit behind the actual size, because the poster is surrounded by white (paper), so a 1mm is enough. If the cut is not enough, it is fine to let the cutler cut inwards.

Draw a middle line as shown below.

In the same way as the angle line, put the middle line on the page (as shown in the figure, if the printing does not print the corner line, you can use this line instead), and combine the corner line with the middle line.

The fill outline color is C100 M100 Y100 K100 (pictured)

Here to tell you the most convenient way to fill the corner color is to fill in the "registered colors", so that you are not afraid to forget to fill in a little color, which is the most practical in more than four-color version (pictured).

Finally, place color strips according to your own preferences (not much to say here). Don't forget to stamp on your mouth, color, size, etc.

So the imposition of a poster was completed


Send Inquiry