How to remove the dirty basis for the imprinting
We are a big printing company in Shenzhen China . We offer all book publications, hardcover book printing, papercover book printing, hardcover notebook, sprial book printing, saddle stiching book printing, booklet printing,packaging box, calendars, all kinds of PVC, product brochures, notes, Children's book, stickers, all kinds of special paper color printing products, game cardand so on.
For more information please visit
http://www.joyful-printing.com. ENG only
http://www.joyful-printing.net
http://www.joyful-printing.org
email: info@joyful-printing.net
In the daily imposition, the bases used in general are mostly new ones. However, the printing industry is increasingly competitive. Every printing company starts with saving raw materials, and the imposition process is no exception. The old film base is often used repeatedly.
There is a lot of dirt on the base, especially the residue left by the summer tape, which is a headache for the operator. If the treatment is not good, the photosensitive layer will be prevented from being completely exposed during the printing process, and sometimes it will stick to the bottom surface of the glass plate of the upper frame of the printing machine, and a lot of dust will be attached, which will affect the complete exposure of the photosensitive layer in the next printing.
If it is not a graphic part, it can be treated with a decontamination agent; if it is a graphic part, it is a troublesome thing. If you use it, wipe off the residue left by the adhesive tape (there is no residue). Prevent the complete exposure of the photosensitive layer, which is reversed to the surface of the PS plate), and then rub it repeatedly with the finger on the developer. It needs to be wiped several times to re-develop the photosensitive layer covered by the residue. Repair the knife to repair or scrap the entire plate.
To prevent similar situations from occurring, there are two main methods that can be used: (1) Within the scope of the conditions, use a soft cloth to rub the alcohol to wipe the dirt on the base, because the alcohol is pure and contains A certain amount of water, dirt is easy to wipe off after water absorption, in addition, alcohol volatilization is also faster, after the dirty, the film base can be used very quickly; (2) as much as possible when uncovering the base, can not be treated at that time If it is processed later, if the film base is not used, it should be packed in paper bags to avoid contact with dirt to protect the film base for convenient use.