Discussion on key technologies in high quality commercial printing
We are a big printing company in Shenzhen China . We offer all book publications, hardcover book printing, papercover book printing, hardcover notebook, sprial book printing, saddle stiching book printing, booklet printing,packaging box, calendars, all kinds of PVC, product brochures, notes, Children's book, stickers, all kinds of special paper color printing products, game cardand so on.
For more information please visit
http://www.joyful-printing.com. ENG only
http://www.joyful-printing.net
http://www.joyful-printing.org
email: info@joyful-printing.net
Find answers from the Goss m-600 commercial wheel press
Since the first m-600 prototype was settled in France in 1992, more than 2,000 m-600 cameras have been sold to 59 countries and regions. More than 200 units have been put into production in the Chinese market, which has promoted the international standardization process of China's printing quality.
The reason why the m-600 press can last for a long time is due to continuous technical improvements. The original design concept of the m-600 was to optimize key factors such as production efficiency and print quality, and each subsequent technological innovation was a sublimation of this concept. In addition, the m-600 emphasizes automation, waste reduction and production flexibility. At the same time, the development of folding technology and peripheral equipment has also promoted the improvement of production capacity and efficiency, enabling the printing machine to be oriented to the production of more product formats.
Special technology to respond to changing needs
At present, the printing industry faces two major problems. One is the rapid development of short-run printing and designated content printing. Second, the competition from printing media is becoming increasingly fierce. Therefore, the printing industry must continuously improve technology and optimize production procedures to meet these challenges. . Rapid printing preparation, short-time start-up, low waste and high utilization rate have gradually become the yardstick for buyers to choose a printing press.
Goss International makes the m-600 press's job transition process smoother with automated color presets, folding presets and plate changes, complemented by closed-loop control, omnimakeready technology and a fully open pre-printed interface. This integrated approach removes unnecessary steps and simplifies the entire printing process. The technical transformation of the new m-600 series is designed to ensure maximum uptime of the entire printing system while reducing waste and manual operations.
Efficient automatic version change
Traditional commercial presses require a lot of downtime for a plate change. Goss developed the autoplate system specifically for this problem, leveraging the potential of downtime to increase productivity. In 1995, autoplate technology debuted Drupa, introducing automatic plate changing technology into the international market, and thus established its leading position in the industry.
Goss autoplate technology has led the development of web offset printing to ultra-short prints and has played a leading role in expanding its range of applications, enabling web offset printing to be used in jobs that were previously only possible with sheetfed presses. Regardless of the number of printing units, the autoplate can easily complete the continuous operation of disassembling plates and loading new plates in just three minutes with the push of a button, and completely avoids the risk of paper breaks. Long-term practice has proven that the Gaussian autoplate system has superior printing preparation and personnel benefits, which has won unprecedented success. At present, more than 300 m-600 presses worldwide have adopted the autoplate system.
Automatic folding conversion
There is no doubt that the Goss autoplate system can save more time for printers, and the automatic folding preset and conversion function of the Gauss folding machine adds to the autoplate system. A range of folding options allow printers to personalize each m-600 press and remotely control all monitored functions via the omnicon console. At the same time, the advanced solution of the gosswebcenter module enables fully automated presets. This series of technologies guarantees that the printer can convert the page at will, and the entire conversion process takes less than three minutes.
Universal folding machine
The new jf-65's diversified Goss m-600 tooth roll folding machine series can easily handle diversified production. Recently, Goss International has further expanded the application range of this series of products through the new jf-65 single folding knife folding machine. The folding machine is capable of achieving good control of signatures in high speed printing. Thanks to the adjustment of a folding knife, the new Gauss folding machine ensures the consistency and precision of all the signatures at all times, thus reducing the operator's workload. The folder is easier to operate and has low maintenance requirements.
The m-600 press is far ahead of the "China Printing Industry Annual Report" in the 16-page web printing technology field and has been recognized in the Chinese market as a technology platform for high-quality printing. Through continuous innovation, Goss enables this technology platform to respond to evolving market demands.