Analysis of the ink path structure of the field printing press
We are a big printing company in Shenzhen China . We offer all book publications, hardcover book printing, papercover book printing, hardcover notebook, sprial book printing, saddle stiching book printing, booklet printing,packaging box, calendars, all kinds of PVC, product brochures, notes, Children's book, stickers, all kinds of special paper color printing products, game cardand so on.
For more information please visit
http://www.joyful-printing.com. ENG only
http://www.joyful-printing.net
http://www.joyful-printing.org
email: info@joyful-printing.net
When a sheetfed offset printing machine prints a large print area or a solid version of the printed matter, it often appears that the same print is dark and shallow before the ink is printed. This phenomenon is more important than the process operation and improper adjustment. The influence of the layout and structure of the machine itself.
1. The influence of the roller structure is in the process of inking the ink to the printing plate. When the inking roller is in the empty position of the printing plate cylinder, the inking roller does not ink, and the amount of ink accumulated on the ink roller is large, and then the roller rolls forward, each time The inking roller is inked to the front position of the printing plate with the largest amount of ink. As the inking roller continuously rolls the ink, the amount of ink on the ink roller is gradually reduced, and the amount of ink in the inking roller is rolled when it is rolled to the printing plate tipping portion. Already very few. This is very easy to cause the ink to be deep before and after.
2. The ink roller that affects the inking unit is generally divided into two groups: upper ink and ink receiving. Different models and two sets of ink rollers are arranged differently. The ink path of the evenly distributed ink roller is divided into two ways, and the four ink rollers are uniformly inked. For the arrangement of the ink roller, if the adjustment is improper, the latter two ink rollers can not be replenished, inked and recovered. The role of the ink layer, the print is very prone to the phenomenon of deep before and after shallow. The ink is more in front of the ink roller, and the first two ink rollers account for 90%, and the last two ink rollers are 10%. Such distribution generally does not produce a deep and shallow phenomenon before the ink color of the printed matter.
3. Process remedies and precautions in operation
(1) The ink roller that is too smooth and aging should be replaced in time to ensure good ink transfer performance of the ink roller and sufficient ink storage capacity on the surface of the ink roller, so that the ratio of the amount of ink consumed by printing to the ink storage amount of the ink roller is as small as possible. This enhances the ability of the ink roller to adjust the amount of ink itself, making the ink color consistent.
(2) Master the fluidity and viscosity of the ink, because the fluidity and viscosity of the ink directly affect the ink transport speed and the ink storage capacity of the ink roller.
(3) Strictly control the moisture of the plate to prevent excessive emulsification of the ink and ensure the normal transmission and adhesion of the ink.
(4) For the uniform distribution type ink path layout, when adjusting the pressure of the plate roller, the first two should be heavier, the latter two should be lighter, and the contact width between each other is generally adjusted to 6mm, 6mm, 4mm from front to back. 4mm. The pressure between the inking roller and the inking roller should be equal to the contact pressure of the inking roller with the surface of the printing plate. Because the rotation of the inking roller should rely on the bilateral equivalent friction force, if the pressure difference between the two sides is too large, the rotation of the inking roller on the surface of the ink roller or the printing plate will become a frictional sliding instead of a pure frictional rotation, which affects the ink. The normal transmission affects the uniform coating of the ink roller on the layout.
(5) Increasing the printing pressure in the shallow ink pad can also provide a certain remedial effect.
How to repair the rubber roller damage After a certain working time of the J2205 offset printing machine of the factory, the first color group has a crack on the edge of the lower ink roller of the squeegee. At first, it was considered that there was no serious problem, but the time was not long, the ink penetrated into the crack, and the crack of the rubber began to expand and fell off the transfer roller one by one. So immediately stop the machine, remove the rubber roller, and wipe the ink on the rubber roller with gasoline, then use a knife to cut the ink that penetrates the crack slightly outward, then use 502 instant adhesive along the edge. Apply a circle, apply it again in a few minutes, wait for about 20 minutes to dry, then smooth the surrounding part with fine sandpaper, and finally reinstall the rubber roller to work. It turns out that this method works very well. In addition, due to improper operation, some of the heavy rubber roller parts have been peeled off a small piece of rubber due to injury. In this case, wipe it clean and scrape it off with a blade, then use 302 modified acrylate adhesive. Spread evenly on the top, and then use the fine sandpaper to level it up when it is used.