3D4U three-dimensional pattern printing software into full stereo printing DIY
We are a big printing company in Shenzhen China . We offer all book publications, hardcover book printing, papercover book printing, hardcover notebook, sprial book printing, saddle stiching book printing, booklet printing,packaging box, calendars, all kinds of PVC, product brochures, notes, Children's book, stickers, all kinds of special paper color printing products, game cardand so on.
For more information please visit
http://www.joyful-printing.com. ENG only
http://www.joyful-printing.net
http://www.joyful-printing.org
email: info@joyful-printing.net
The long-standing 3D Printing has a history of 50 years. Its magical changes make it easier to grasp people's sights. However, because of its high production cost and often requiring a large amount of printing, it has not been popularized over the years. Developed by Media Bop of the United States, the 3D4U, a three-dimensional graphic printing software that has just arrived in Hong Kong, is a revolutionary technology that directly prints inks on lenses (Len ticular Lens), which simplifies three-dimensional printing into a single program, reducing costs. It also made 3DPrintingD.IY possible.
Save on production costs
Mr. Zeng, the head of 3D4U three-dimensional graphic printing software distributor 3MM Co., Ltd. explained when introducing 3D4U software, stereo printing has existed for a long time, nothing new. Only the traditional three-dimensional printing needs to first print the pattern on the paper. After printing, the glue is applied to the lens and the lens is aligned. Once the position is deviated, it will be invalidated. The scrap rate is often as high as 3% or 40%. . The most important thing is that if the pattern is printed on the paper first and then attached to the lens, the quality of the picture will often be inferior to that of the directly printed lens. Moreover, the traditional three-dimensional printing is printed in an offset manner, and it is often required to reach a certain number when ordering. If only a few sheets of printing are required, it is not cost-effective to pay a high cost. For this reason, he is interested in promoting 3D4U software in Hong Kong to further popularize this technology and expand more business opportunities.
3D4U three-dimensional pattern printing software into full stereo printing DIY
Equipped with a special lens
Mr. Zeng said that the 3D4U's automatic calibration and recording function makes it easy for users to split the image into different layers and combine them into a single stereo image. After the image is completed, it can be repeatedly adjusted on the fluorescent screen to be satisfactory before printing directly onto the lens. The 3D4U is equipped with a special lens with a white and transparent coating on the back, which can improve the brightness of the image, make it clearer and more layered, and prevent the image from fading or falling off. In addition, the software has a professional version, with a large-format printer, can print a large stereoscopic poster with a width of 44 inches and unlimited length. In general, users only need two or three hours to learn to use the software, and it takes about 2 to 3 hours to make a stereo image, and about 20 minutes to print an A4 size. However, if you want to produce high-quality stereo images, the resolution of the original image is the key. For example, to make a 4 inch x 5 inch 3D image, the original image should have a resolution of 2,200 dpi or more. However, there are no other restrictions on the pictures selected. Mr. Zeng said with a smile: "3D4U is a set of software specially designed for making 3D images. Even a normal picture or photo can be easily converted into a body image through this software. However, in the selection of printers, One thing is that you must pay attention." He continued to explain: "The printer uses EPSON as an example. It is generally divided into 720, 1440, 2880 models, and HP or Canon has 600, 1200, 2400 models. Pay attention to the relationship between these numbers and the stereo layer. If the number of layers is not divided by the model, it means that the printer may not print the image normally. For example, the layer is 7 and the 720 model is selected. Except, so when printing an image, some abnormal display may appear. This is the important point to pay attention when making stereo images."
3D4U three-dimensional pattern printing software into full stereo printing DIY
Still have room to play
3MM Co., Ltd. has just been established and has not yet been put into service. Asked Mr. Zeng's future positioning, he said that it mainly sells 3D4U software, lenses and after-sales service to customers. For the software or the possibility of being pirated, Mr. Zeng’s response is: “You can’t worry too much. Now that pirated software is so rampant, we sell one set. But even if people really get the software, they still have to Let's buy materials! These special lenses are only available to us for the time being!" It is specially made, will the price be very expensive? "At present, an A4 size lens is priced at about 20 to 30 yuan, depending on the quantity ordered. However, after the popularity in the future, it is expected to further lower the price." Mr. Zeng said frankly: "Because this technology is too new, we still look like a blind man, I don't know where to start." But his confidence in the product's prospects is full. “The application range of stereoscopic images is very wide. It can be included in the small production of DIY in the home, as well as the large posters of the subway. Of course, there are more uses waiting for us to discover. And now we are still researching and discussing to perfect this. The technology hopes to create more different options in addition to the effects of simulating 3D, animation, color change, and image alternation. As far as we can see, 3D4U does have a lot of space to play, so we are developing its prospects. Absolutely full of confidence."