Industry knowledge

Pre-coating film coating technology and its influence on the binding of bookbinding In recent years, the film is basically a pre-coated film. Since

How to do a good job in the offset printing process In the offset printing process, especially the monochrome offset printing machine, regardless o

Analysis of the cause of dirty on PS plate in offset printing In offset printing, the PS plate is a common problem. This article only briefly analy

In addition to the PS version of the dirty If there is no baked plate, if you find that the layout is dirty after you get on the machine, you have

The requirements of offset printing on blankets and their loading techniques First, the three characteristics of offset printing 1. Offset printing

The influence of various physical properties of blanket on the quality of printed matter The thickness is expressed and measured. The thickness val

Talking about the technical standard of book EVA hot melt adhesive The hot melt adhesive is a solid at normal temperature, gradually softens upon h

SCREEN5055 error report! SET FILM MAG cassette is not installed, and the cassette is loaded. SET COLLECT BOX is not loaded, and the cassette is

CREO 800V imagesetter common error message 􀂄 PLOTTER: Startup Failed Photographer failed to start Solution: Check the error message in the info

Summary of ECRM photo-setting machine VR and mako series maintenance experience 1: Fault Description: Bottom gray. Fault analysis: caused by the l

ECRM series phototypesetting machine error information analysis and solution 1.SYSTEM ERROR #1 [Fault Description]: The problem of filming

Analysis of the compression phenomenon of ECRM-1030 laser imagesetter At present, many users are using the ECRM-1030 imagesetter, most of which hav