Making of pentagon box
We are a big printing company in Shenzhen China . We offer all book publications, hardcover book printing, papercover book printing, hardcover notebook, sprial book printing, saddle stiching book printing, booklet printing,packaging box, calendars, all kinds of PVC, product brochures, notes, Children's book, stickers, all kinds of special paper color printing products, game cardand so on.
For more information please visit
http://www.joyful-printing.com. ENG only
http://www.joyful-printing.net
http://www.joyful-printing.org
email: info@joyful-printing.net
To make such a weird box, you need two conditions: 1, skilled production skills; 2, handy software.
He has both of these conditions. With years of production experience and InDesign's powerful graphics processing capabilities, this solution is easily accomplished. Interested friends may wish to try the cat painting tiger.
Due to temporary device issues, he was used on the PC's InDesign CS. It would be more convenient if it were on a Mac.
I hope that all the heroes will devote their own craftsmanship and cheats (the ancestral secrets are better) to promote the overall level of graphic production.
This is a mosquito-repellent incense box made according to the customer's request. The box is filled with mosquito-repellent incense, so I only know that the inner diameter of the box is 140mm, and the box is a pentagon shaped box. Let's see how I made this box. of:
1, first draw a circle with a diameter of 140mm;
2, draw another line, use the alignment function to align the line and the circle to the center and down;
3,Draw a concentric circle to make it larger than the circle and line that has been drawn. I will copy the previously drawn circle in situ and then increase its size.
4, select the line and the big circle, double-click the rotation tool, fill in 72 and select the copy (copy), thus copying five lines tangent to the small circle;
5, then use the pen tool to connect two of the five lines to two intersecting trapezoids;
6, using the Pathfinder, get the intersection of the two trapezoids;
7, Use the pen tool to connect the two ends of the remaining line so that it is larger than the just generated pattern;
8, then use the intersection once, so that you get a pentagon that is tangent to the circle;
9, in order to make this pentagon look positive, I draw another figure larger than this pentagon, and then intersect this pentagon again, so that I get a stable pentagon;
10, the next step: the thickness of the box, this is 76mm, in order to get the exact length, I copied the pentagon in situ, and pulled out the extra points to delete;
11, then copy this side length by a distance of 76mm, and use the pen to connect the two lines into a quadrilateral;
12, because of the bleeding, I have lengthened the quadrilateral by 6mm, so that the five sides will overlap each other in the future. In order to remove the excess, I drew a vertical line centered on the concentric circle, and then centered. Point the center of the circle to rotate 36 degrees and copy one; rotate the vertical line -36 degrees, then use the pen tool to connect the two lines to surround the part that needs to be retained, add the distance and then select the intersection, so you get a Side with bleeding;
13, copy the four sides of the figure, fill the side pattern for use;
14,When the horizontally placed side is completed, each side can be completed one by one by using the first side as the starting point and the outermost large circle to rotate by an integral multiple of 72.
This special box is doing this, is it a bit interesting?